This Hipshot® 6 String Tone-A-Matic Bridge and Tailpiece set comes expertly crafted from aluminium and beautifully plated in a choice of Chrome, Gold, Nickel or Black finish.
Supplied with Studs, Bushes and Hex Keys

These Hipshot® 6 String Tone-A-Matic Bridges are expertly crafted from aluminium and beautifully plated in a range of finishes.
Supplied with Studs, Bushes and Hex Keys.

Gotohs take on the 4mm Tune-o-matic bridge - made to the usual exceptionally high standard you'd expect from the Japanese powerhouse of guitar parts - and sporting titanium saddles to really help nail that perfect tone.

Gotohs take on the 4mm Tune-o-matic bridge - made to the usual exceptionally high standard you'd expect from the Japanese powerhouse of guitar parts - and sporting hardened Brass saddles.

Gotohs take on the 4mm Tune-o-matic bridge - made to the usual exceptionally high standard you'd expect from the Japanese powerhouse of guitar parts - and sporting Aluminium brass saddles to really help nail that perfect tone.

Gotohs take on the 4mm Tune-o-matic bridge - made to the usual exceptionally high standard you'd expect from the Japanese powerhouse of guitar parts - and sporting hardened Zinc saddles.

Considered by some to be a slight improvement on the original ABR design due to the chunkier body, argued to give better sustain, fitted with fully adjustable roller saddles to reduce string friction, which is never a bad thing. Works a treat with any vibreto / trem systems.

Supplied with 4mm (metric) thumb wheels and bushes

An Axesrus bridge designed to port straight onto the modern Gibson® Tune-o-Matic® mounts

Considered by some to be an improvement on the original ABR design due to the chunkier body, argued to give a wider intonation range.

The original design, and arguably still the best. Simply built in the mind frame of "Less to go wrong" makes for a reliable, well designed bridge that's stood the test of time on some of the world's best guitars. No bells and whistles.

Supplied with 4mm(metric) Thumb Wheels

Gibson, strangely, actually use M5 threaded posts on their Nashvilles posts/bushes, rather then an Imperial thread, which is a little confusing, but beyond that, its as you expect really. These are conversion posts - allowing you to fit "true" ABR style bridges onto guitars that were never designed to take them.

They screw into the M8 bushes you'll find on most "mid range" guitars made in the far east - most common on guitars like Epiphone®, but, really, anything that normally comes with a bridge with 6mm posts (easily identifiable because of the slot head in the post) and the part that sticks up, above the bush, is a 6-32 UNC section, which will allow you to fit a "real" ABR, with the smaller holes.

This is a Nashville bridge stud suitable for any Gibson® guitar, fitted with that style of bridge (NOT an ABR) released AFTER 2012.

Prior to 2012, Nashville bridge equipped Gibson® guitars used an 4mm post into an M5 threaded bush.

The little wheels used to alter the height of the Nashville style bridges. Suitable for Bridges with 4mm Holes.