As supplied in most import or economy guitars, where the thinner threaded section often rules out CTS pots. A reliable and affordable solution that will provide years of use.

Supplied with 2 Nuts and a washer.

(2)

The industry standard push pull pot, with an Alpha mini pot mounted onto a DPDT (Double pole, Double throw) On/On switch. A joy to work with, opening the door to coil tapping, phase switching, kill switches etc.

Supplied with 2 Nuts and Washer.

A slight twist on the classic DPDT On/On switch pot, we've had these made in the Push/Push style.

They really come into their own on guitars with push fit knobs when you don't have enough grip on the tops to use a traditional Push/Pull pot, and often find yourself slipping as you try to engage the switch.

They can be used in exactly the same way as a Push/Pull, for Coil Tapping, kill switching etc.

(2)

Great little pots for use when your short on space in a control cavity.

20mm Total Shaft Length.10mm thread lenth.30mm overall

Supplied with 2 Nuts and Washer.

16.9mm Total Shaft Length. 22.9mm overall length. Supplied with 2 Nuts and Washer.

A good alternative long shaft pot, more readily available in Linear and Log versions, and generally more affordable, the long shaft Alpha doesn't turn up on many guitars as standard, but its a versitile replacement part none the less.

Supplied with 2 Nuts and a washer.

Two full sized 500k pots built into a concentric pot body for tone and Volume Control Combined.

Supplied with Gold, Chrome or Black Knobs,2 Nuts and Washer.

The industry standard push pull pot for "thick topped" guitars, with Long shaft Alpha pot mounted onto a DPDT (Double pole, Double throw) On/On switch. A joy to work with, opening the door to coil tapping, phase switching, kill switches etc and ideal for Les Paul Mods.

Supplied with 2 nuts and a washer.

Alpha Blend Pot with Pin Terminals. Great for panning between pickups

A great way to turn off active pickup circuits or amps by simply turning the volume to 0, saving power and increasing battery life.

Simply connect the live wire to the A tab on the bottom, and out of the F tab, creating a simple yet effective power switch without modifying the guitars wood work.

Supplied with 2 Nuts and Washer

Control pointers used to be fairly common when electric guitars first appeared, but they've become a bit of a rarity nowadays thanks to the familiarity most of us have with our Volume and Tone controls.

They do, however, still turn up occasionally on Vintage styled guitars, re-issues and older guitars in need of renovation.

Available in 3 or 5 way

Available in 3 Way and 5 way

Supplied with counter sunk, Nickel bolts.

(1)

Available in Chrome or Gold body with a selection of tip colours. Perfect replacement for Epiphones.or where a longer nut thread is required.

These switches have been in production for decades at this point - once
upon a time, they were pretty much exclusive to Epiphone® guitars, but
in recent years, they turn up absolutely everywhere - Fender®, Squier®,
Tokai®, PRS®... you name it! If theres a mid range guitar with a toggle
switch, chances are its one of these.

Perfect repacement for Epiphone or Import Guitars

Tight fitting Mono Jack Socket for most Electrical Instruments, suitable for any cable with with 1/4" Jack plugs.

Supplied with a Metric Thread

Tight fitting Stereo Jack Socket for Active Electrical Instruments.

Supplied with a Metric Thread

1/4" jack socket for electric guitars, with colour codes Metric threads! Silver Jack socket on a gold or black plate driving you mad? Then look no further!

This is the switch that turns up with some regularity in Ibanez HH guitars - and gives that very distinctive switching system.

(1)

Available in 3 Way and 5 way

the YM switches are incredibly well built, and turn up as standard on most Japanese Fender® guitars.