The old firebird pickup is very different to most "normal" humbuckers, and actually uses a pair of bar magnets in place of any steel poles, so we carry a kit to rebuild or repair that style of pickup.

A slightly strange take on a humbucker, here we have a SLANTED version - made popular originally on the Gibson Nighthawk, and more recently on fan fret guitars - the slanted humbucker offers a slightly more "quirky" look then the traditional type. Beyond the base, all the parts are identical thankfully.

Magnetic spacers are a novel little idea, and turn up sporadically on production pickups every so often. Essentially, they replace the inert maple or plastic spacers either side of a Humbuckers poles to alter the tone, usually by making a pickup more aggressive.

Closed faced Mini humbuckers are associated with one guitar usually - the Gibson® Firebird! They actually turn up on a few other makes and models, but its the Firebird® we all think of when we see this style of cover/pickup.

The pickups in that guitar, originally, were actually a bit of a departure from what had been before - rather then using a bar magnet and steel poles (either poke screws and slug, ala a "normal HB", Pole Screws and steel bars, ala a "traditional mini HB" or even the modern Firebird offerings, which simply use 2 steel bars!) the real deal Firebird® Mini humbucker used 2 bar magnets, slotted into the housings on the bobbins.

Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.

Full Thread, slot head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Nickel, 33mm thread lengths

Slanted humbucker mounting rings, suitable for the Gibson® and Epiphone® Nighthawk® - where the bridge pickup is slanted off to a pretty steep angle.

Humbucker and P90 sized Bar magnets, available in Alnico 2 and Alnico 5

62mm or 58mm x 12.5mm x 3.2mm

Full Thread, Phillips, Dome head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Chrome, Black,Nickel, Cosmo or Gold, in both 24mm and 30mm thread lengths

(2)

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4 and 5

58mm x 12.5mm x 3.2mm

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4, 5, 6, 8 and ceramic

62mm x 12.5mm x 3.2mm

(1)

These are the very small screws which you'll see on certain pickup surrounds, back plates etc - very similar to a pickguard screw really, and for some applications, they're used for that purpose.

These are the very small screws which you'll see on certain pickup surrounds, back plates etc - very similar to a pickguard screw really, and for some applications, they're used for that purpose.

Completely Flat Metal Mini Humbucker Ring

Please note - these rings will fit any Axesrus Mini Humbucker with or without a cover, but this may not be the case for other manufacturers - so its worth making certain your humbucker to no larger then the internal dimensions.

Completely Flat Metal Mini Humbucker Ring

Please note - these rings will fit any Axesrus Mini Humbucker with or without a cover, but this may not be the case for other manufacturers - so its worth making certain your humbucker to no larger then the internal dimensions.

Completely Flat Metal Mini Humbucker Ring

Please note - these rings will fit any Axesrus Mini Humbucker with or without a cover, but this may not be the case for other manufacturers - so its worth making certain your humbucker to no larger then the internal dimensions.

These are the bar magnets commonly found in Gibson® firebird mini humbuckers - used as a magnetic pole within the bobbin, resulting in a very different tone.

Slanted Humbucker Base Plate - as found on the Gibson® and Epiphone® Nighthawk
Beyond the strange shape - everything that fits to them is standard - its just offset in the guitars body, and as such, required a specialist base plate if you're replacing, or building your own versions.

Available in 50mm and 52mm.

These Mini Humbucker Base Plates come in a choice of Nickel or Brass.

Slightly different to the "normal" poles, because these are actually 14.5mm long rather then the usual 12mm, which makes them ideal for the taller bobbins that are coming to the market nowadays, as well as anything built around a 5mm tall bar magnet and Humbucker sized P90s

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Steel pole pieces for Humbuckers

Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

A full thread, phillips head, recessed screw that you'll find carrying out various jobs on a guitar.

Suitable for Humbucker mounting rings, Gibson style pickguards and back plates, Jack plates etc

These are the "traditional" Mini humbucker bobbins - weirdly, a lot more generalized then normal humbucker bobbins, allowing for much more customisation on the construction of the pickup, but ultimately, forcing you to always have a cover on a Min-bucker.

These are the small bras screws traditionally used to mount a humbuckers bobbins to their base plates.

Good quality Springs to hold Pickups against pick guards or mounting rings reliably, with a little bit of play.