Near Identical to most other back plates, but lacking any string holes - common found on guitars using locking tremolos.

A pickguard the for the Ibanez GRX40, the entry level "fat strat" Gio RG which has proved so popular since its release in the early 2000s

Please note, these are not official Ibanez® parts.

This pickguard is designed to fit on the Ibanez® RG®, specifically, those with the 50 prefix in their model number (which denotes "has pickguard, in the HSH config")
Please note, these are not official Ibanez® parts.

Ok - so "officially" there aren't many RGs that come with this plate as standard, but its something that definitely has a place in the world! Ditching the middle single coil, and going back to basics with a HB/HB setup - OR - go nuts and use the Ibanez® smart switch to give you the pickup switching options found on some of the 20 series.

Please note, these are not official Ibanez® parts.

The Ibanez® Mirko range was released in 2006, and for the most part, its been in the RG style - however, its worth noting that whilst the guitars haven't really changed much before the finish - there have been 2 version of the pickguard.

Please note, these are not official Ibanez® parts.

A pickguard the for the 90s RG770, which can also be used on many other Ibanez RG models to convert guitars without pickguards into guarded models - a great way to protect the guitars finish, and prolong its life.

Please note, these are not official Ibanez® parts.

These Pickguards come in a choice of three ply Black, three ply White Pearl, three ply White or 1 ply 'Mirror' (Silver), and are designed to accept a 7 string humbuckers at bridge and neck positions.

Please note, these are not official Ibanez® parts.

We are pleased to offer this pre-assembled wiring loom, fitted directly to a plate, suitable for an Ibanez® RG®.

Please note – these assemblies are made to order, and as such, come under the rules and regulations pertaining to custom work in regards of returns. These are not official Ibanez® parts.

We are pleased to offer this pre-assembled wiring loom, fitted directly to a plate, suitable for an Ibanez® RG®.

Please note – these assemblies are made to order, and as such, come under the rules and regulations pertaining to custom work in regards of returns. These are not official Ibanez® parts.