"Budget Full Sized" Control Assembly

Suitable for a Standard Telecaster®

Please note, these are not official Fender® parts.

Control Assembly - For "Humbucker Neck" Tele®

A completely constructed Control plate, for a Fender® Telecaster®, wired to the modern standard - 3 way switching, 1 volume, 1 tone, bridge, both and neck - as we all know and love.

Built using the highest spec parts - CTS pots, Axesrus Switch, Cornell Dubillier cap, 22 AWG vintage cloth hookup wire and a Switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barrell knobs fitted.

Please note, these are not official Fender® parts.

"Volume only" Control Assembly - For Esquire®

A bit of a strange plate all things considered - designed to fit onto a Fender® Esquire® (or any other Telecaster® with only one pickup) - but cutting away all the bells and whistles - no 3 way switch, no tone control - just a volume control, and a mono socket on the output.

A great way to turn your Esquire into a no-nonsense player!

Control Assembly - For Tele® Thinline

Exactly the same as a normal Telecaster control loom, but the pots on the thinline are a little closer together, and, obviously, you dont have the control plate thanks to that iconic pickguard - beyond that - identical! All hand made in the UK using high quality parts, ready to drop into your guitar.

Built using the highest spec parts - CTS pots, Axesrus Switch, Cornell Dubillier cap, 22 AWG vintage cloth hookup wire and a Switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barrell knobs fitted.

Please note, these are not official Fender® parts.

Control Assembly - For Tele®

A completely constructed Control plate, for a Fender® Telecaster®, wired to the modern standard - 3 way switching, 1 volume, 1 tone, bridge, both and neck - as we all know and love.

Built using the highest spec parts - CTS pots, Axesrus Switch, Cornell Dubillier cap, 22 AWG vintage cloth hookup wire and a Switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barrell knobs fitted.

Please note, these are not official Fender® parts.

Control Assembly - For Nashville Tele®

A completely constructed Control plate, for a Fender® Nashville Telecaster®, differing from a Normal Tele® in that is has 3 pickups, rather then 2, so this is reflected in the switch so you're getting the following setup- 5 way switching, 1 volume, 1 tone, bridge, both and neck.

Built using the highest spec parts - CTS pots, Axesrus Switch, Cornell Dubillier cap, 22 AWG vintage cloth hookup wire and a Switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barrell knobs fitted.

Please note, these are not official Fender® parts.

Control Assembly - For Tele® - 4 way Mod

A completely constructed Control plate, for a Fender® Telecaster®, wired to the the 4 way mod version - Standard switching plus an extra option for both pickups in series, 1 volume, 1 tone, bridge, both and neck - a Tele® with a little bit more on offer.

Built using the highest spec parts - CTS pots, Oak Grigsby Switch, Cornell dubillier cap, 22 AWG vintage cloth hookup wire and a switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barell knobs fitted.

Please note, these are not official Fender® parts.

Control Assembly - For Tele® - Slanted Switch

A Prewired control assembly for the Fender Telecaster, but with a slanted switch control plate, giving better access to the switch and volume control.
Please note, these are not official Fender® parts.

Control Assembly - For Tele® - Toggle Switch

A Prewired control assembly for the Fender Telecaster, but with a toggle switch in place of the traditional lever switch
Please note, these are not official Fender® parts.

Loaded Pickguard - For Telecaster® Thinline

We are pleased to offer this pre-assembled wiring loom, fitted directly to a plate, suitable for an Fender® Telecaster® Thinline.

Built in-house using high quality parts, the classic white pickguard comes fitted two 250k short shaft pots, one orange drop capacitor and one three way switch, and is finished with two flat top knobs and a black top hat switch tip.

Wiring Loom - For Telecaster® Deluxe & Custom

Suitable for Telecaster® Deluxe & Custom style guitars, with the 4 controls and 3 way toggle switch on the upper bout.

Please note, these are not official Fender® parts.

Loaded Pickguard - For Telecaster® Deluxe® (2004 - Present)

We are pleased to offer this assembled wiring loom, fitted directly to a plate, suitable for an Fender® Deluxe® .

Built in-house using high quality parts, the classic black pickguard comes fitted four 500k short, solid shaft CTS pots, two 0.022 orange drop capacitor, A switchcraft toggle switch* and mono socket, and its all wired up wiring metal braided, wax cloth hookup wire.

Loaded Pickguard - For Telecaster® Custom®

We are pleased to offer this assembled wiring loom, fitted directly to a plate, suitable for an Fender® Custom® .

Built in-house using high quality parts, the classic black pickguard comes fitted four 500k short, split shaft CTS pots, two 0.022 orange drop capacitor, A switchcraft toggle switch* and mono socket, and its all wired up wiring metal braided, wax cloth hookup wire.