This is a “parts kit” for a “Fan fret” 8 string Humbucker, and contains everything you’d need to make your own pickup, EXCEPT the wire for the coils, the hook-up wire, any tape used to protect the coils after winding, and solder.

This is a “parts kit” for a “Fan fret” 7 string Humbucker, and contains everything you’d need to make your own pickup, EXCEPT the wire for the coils, the hook-up wire, any tape used to protect the coils after winding, and solder.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

This is a full kit to make one Rail Humbucker pickup, suitable for the bridge position on a Telecaster®, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a P90! Be it a Soap Bar, a Dog Ear, or for an Epiphone Casino!

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

The old firebird pickup is very different to most "normal" humbuckers, and actually uses a pair of bar magnets in place of any steel poles, so we carry a kit to rebuild or repair that style of pickup.

This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M5 poles, rather then the M3 poles found on the "traditional" humbuckers - this is an important consideration on nailing that modern Wide Range tone.

This is a full kit to make one Rail Humbucker pickup, suitable for any single coil route, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a Humbucker sized P90!

This kit contains all the parts required to make a “stacked and shielded” noise cancelling single coil.

Our Fat Rail humbucker kit - ideal if you want to wind something very hot, very heavy, and VERY hifi!

This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M3 poles, rather then the M5 poles found on the "modern" version - this is a way to get a traditional humbucker tone from a Wide range route, NOT a way to get a modern wide range tone.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

This is a kit that includes everything you'll need to wind a traditional style mini Humbucker (except the coil and hookup wire)

This is a pickup parts kit for the Epiphone Casino, and old spec Gibson ES330 guitars - essentially, a P90, but with a metal cover, a narrower string spacing on the neck version, and a specific neck pickup cover. A bit of an odd ball pickup frankly, but this kits got all the parts you need!

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

This kit is a little more restircted then out normal humbucker kit (where you can pretty much build anything you can dream up!) - and that's completely intentional. This kit is designed to replicate one of the original humbuckers, warts and all.

So please bare in mind, that this kit only comes with the long leg bases, 5-40 UNC bolts, 6 screw poles, 6 slugs, and a base to accept them (the holes in the base are threaded for the pole screws) - its also only available in the 49.2mm spacing, as correct for the period.

This is a full kit to make one single coil pickup, containing everything you'll need except the copper winding wire.

Our thin Rail humbucker kit - ideal if you want to wind something very hot, very heavy, and VERY hifi!

This is a full kit to make a pickup for a Fender® Jaguar® or similar guitar.

This Kit contains everything you need to make a replacement pickup for the Fender® Mustang® Bass - similar in style to the Precision® bass, ut the slightly different coil shape helps give the Mustang® its characteristic tone.

Please note, these are not official Fender® parts.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a P90 for a Gibson guitar.

At first glance, this kit looks near identical to our "normal" humbucker kits when speced up with 12 hex poles BUT this is actually different.

With the normal kit, the 12 screw pole option comes with M3 (or 5/40) bolts, which thread into the specific screw side bobbins, where this kit is supplied with M5 hex bolts, which are designed to thread into the "slug" side bobbin.

At first glance, this kit looks near identical to our "normal" humbucker kits when speced up with 12 hex poles BUT this is actually different.

With the normal kit, the 12 screw pole option comes with M3 (or 5/40) bolts, which thread into the specific screw side bobbins, where this kit is supplied with M5 hex bolts, which are designed to thread into the "slug" side bobbin.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

This is a full kit for making the pickups for a Fender Jazz Bass or similar guitar

A slightly strange take on a humbucker, here we have a SLANTED version - made popular originally on the Gibson Nighthawk, and more recently on fan fret guitars - the slanted humbucker offers a slightly more "quirky" look then the traditional type. Beyond the base, all the parts are identical thankfully.

This is what we’d call a “Triangle leg” humbucker kit – whilst it'll fit pretty much every guitar ever built, it differs from a "normal" humbucker because of the "wings" on the base. Basically, its got a smaller profile, so it'll fit into tighter routes. You'll often see this type of humbucker presented on guitars without pickguards of pickup rings, with the humbucker simply screwed into the guitar.

This is a full kit for making the pickups for a 5 String Fender Jazz Bass or similar guitar