Its probably more common then ever for people to be upgrading and tweaking their "mid range" guitars to bring them into the same leagues as the "top end" stuff on the market, and its fair to say no other guitar line gets as much attention as the humble Epiphone® Les Paul® - in recent years, improvements in construction and finishing have meant they're a great foundation for this sort of thing.

But, as always with recent Epis, and infact, most other guitars made in the far east, the electronics normally leave a little to be desired, so this loom is a fantastic jumping off point to take your Korean, Japanese, Indonesian and Chinese guitars (be they Paul-a-likes, or anything with the characteristic 4 controls down the bottom, toggle switch up at the top bout!) to the next dimension.

So with that in mind, we’re making this pre-assembled loom up as a drop in replacement or upgrade for your guitars – dead easy to fit, just attach the pickups to the respective volume pot, connect the ground wire from the bridge to the ground loop - and your away – everything else has been done for you. Be aware though (and this isn't a hard and fast rule weirdly) - depending on your guitar, you may have to remove the switch from the loom to thread the wires through (its not too bad a job though, everything is colour coded, heat shrunk for safety -removing and re-connecting the switch is no harder then connecting your pickups.

Technical Brief

500k Pots (Logarithmic), 3 way toggle, mono output, 0.022 capacitor, wired to the "modern" standard