Main Description
A slight twist on the classic DPDT On/On switch pot, we've had these made in the Push/Push style.
They really come into their own on guitats with push fit knobs when you don't have enough grip on the tops to use a traditional Push/Pull pot, and often find yourself slipping as you try to engage the switch.
They can be used in exactly the same way as a Push/Pull, for Coil Tapping, kill switching etc.
Supplied with 2 Nuts and Washer. |
|
Fender®, Squier®, Stratocaster® and Telecaster® are registered trademarks of Fender Musical Instruments Corporation and Axesrus® has no affiliation with FMIC
Grounding
A word to the wise here - when your grounding push pots, NEVER solder to the box which contains the switch mechanism.
Always, where possible, make your connection on the pot casing, or, worst case, the "tab" at the bottom of the switch.
Soldering to the switches case, will damage the mechanism which causes the switch to "latch" into position.
Failure to follow these instructions, will void any warrenty - this is an installation error, not a manufacturing fault.
