7 String single coil fibre boards - 61.2mm spacing, and designed for 5mm poles.

Noiseless singles are absolutely jam packed with propriety parts frankly - but none of them are more important to the functionality then the "Gauss" plate.

Please note, these are not official Fender® parts.

A pair of fiber boards to build Staple poled P90s - instantly recognisable by those rectangular Alnico poles rather then the more traditional slot head screws, these are for a very unique pickup.

A pair of Fiber boards and a plastic "central spacer" to make a single bobbin for a P90 sized humbucker.

A pair of Fiber boards for building up Humbucker sized P90s - perfect to
pair with our brass stand offs to create easy to use bobbins in
variable heights.

This is a "very historically accurate" single coil board set, which might seem a bit of a strange thing on the face of it (how different can it actually be?!) - but there were some weird quirks in 1950s single coils that make them a little more interesting.

A pair of Fiber boards to make standard sized P90s.

These Single coil boards, often called "flatwork" in the trade, are made to the same high standard we use on all our pickups. Constructed from Fibre board, and supplied with eyelets for easy soldering.

These are the fiber boards needed to make one side loading single coil - almost identical to a standard single coil, with a base, housing 2 eyelets and the threaded height adjustment holes, and a smaller top section.

These Single coil boards, often called "flatwork" in the trade, are made to the same high standard we use on all our pickups. Constructed from Fibre board, and supplied with eyelets for easy soldering.

These are the metal base plates found on most Telecaster bridge pickups - sometimes called grounding plates or Focusing plates, their primary function is to connect the strings to the ground loop of the guitar, but they do also have an effect on the pickups final tone.

Please note, these are not official Fender® parts.

Fibre boards to make pickups for the Fender® Jazzmaster®

Pole spacing at 51.5mm

Fibre boards to make pickups for the Fender® Jaguar®

Pole spacing at 51.5mm

These Lipstick boards are ideal for making pickups for a Telecaster® often called "flatwork" in the trade, are made to the same high standard we use on all our pickups. Constructed from Fibre board, and pre-fitted with brass eyelets for easy soldering.

Please note, these are not official Fender® parts.

These bridge boards, often called "flatwork" in the trade, are made to the same high standard we use on all our pickups and are ideal to us on Telecaster® guitars

Constructed from black Fibre board, and pre fitted with brass eyelets for easy soldering

Please note, these are not official Fender® parts.

These focusing plates are mounted to the single coil and are generally used to make them sound warmer.

Please note, these are not official Fender® parts.

These focusing plates are mounted to the single coil and are generally used to make them sound warmer.

Please note, these are not official Fender® parts.

The Fibre board used in the construction on our TT line, allowing the "rail" poles to decend below the pickup, and accomidate the bar magnet, built in the side loading style

The Fibre board used in the construction on our TT line, allowing the "rail" poles to decend below the pickup, and accomidate the bar magnet, built in the side loading style

The Fibre board used in the construction on our TT line, allowing the "rail" poles to decend below the pickup, and accomidate the bar magnet.

As used on our own TT models - allowing you to wind a coil using rail poles, and mounted to a specific base, with a specific magnet - and fit a humbucker into a single coil route.

Not exactly period correct, but very simple to use, and a much more stable base the the historic method