This is a full kit to make one Rail Humbucker pickup, suitable for any single coil route, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

This kit contains all the parts required to make a “stacked and shielded” noise cancelling single coil.

With tall covers and tall poles, comes increased space internally for copper - allowing you to wind a pickup to a respectable level with 42 AWG, or to use 1/4" poles with 43 AWG, or, just to go completely off the rails and design something completely unique!

Please note, these are not official Fender® parts.

Standard Lipstick neck pickup covers as seen on Telecaster® guitars. A great way to breathe a bit of life into your old guitars

Please note, these are not official Fender® parts.

These pickup covers are faithful reproductions of the original Single Coil covers used in the early Stratocaster® - made from Nylon rather then the PVC found on later models, and with a much softer bevel on the outside edge giving them a slightly more rounded appearance.

Nickel plated brass Eyelets, for fitting into pickup fiber board, giving you a point to thread the coil wire through, and to solder the hookup wires to.

This is a full kit to make one side loading single coil pickup, containing everything you'll need except the copper winding wire.

This is a full kit to make one single coil pickup, containing everything you'll need except the copper winding wire.

This is a full kit to make one single coil pickup, containing everything you'll need except the copper winding wire.

This is a full kit for making the pickups for a Fender Mustang or similar guitar, notablly with those slightly shorter magnets, and the close faced covers.

Covers suitable for Burns Trisonics Bass pickups

Covers suitable for Burns Trisonics.

These are the style of covers that DiMarzio® fit to their pickups designed to go into Telecaster® neck slots - slightly different to a "normal" covers because they incorporate that "triangular" shape, and flat top from a vintage cover (although the "shape" is much less angular) but the cover is more "complete", like a modern version (where the coils are completely surrounded by the cover)

Please note, these are not official DiMarzio® parts.

7 String single coil fibre boards - 61.2mm spacing, and designed for 5mm poles.

This is a "conversion" part - pretty straight forward really - its a humbucker ring internally, but the external "shape" is that of a Jazzmaster® pickup route.

Pickups fitted to the Fender® Jaguar®, superficially at least, look very similar to normal single coils, but one of the important components that really shape their sound, is the steel grounding plate fitted underneath the bobbin.

Please note, these are not official Fender® parts.

Sets of Alnico rod pole pole magnets.
Available for a range of different guitars and bases, in different grades of Alnico, different combinations of length, and different diameters.

These Alnico 5 pole pieces are exactly the same as we use on our single coil pickups, but we're providing them un-magnetised to allow for full customisation.

Please note these are not official Fender® parts.

Standard Lipstick neck pickup covers as seen on Telecaster® guitars. A great way to breathe a bit of life into your old guitars. These covers have a curved top.

Please note, these are not official Fender® parts.

Standard Lipstick neck pickup covers as seen on Telecaster® guitars. A great way to breathe a bit of life into your old guitars

Please note, these are not official Fender® parts.

Standard Lipstick neck pickup covers as seen on Telecaster® guitars. A great way to breathe a bit of life into your old guitars. These covers have a flat top.

Please note, these are not official Fender® parts.

Noiseless singles are absolutely jam packed with propriety parts frankly - but none of them are more important to the functionality then the "Gauss" plate.

Please note, these are not official Fender® parts.

Replacement Rails for Pickups such as the Axesrus TT series, but now slightly wider and completely flat across the top - ideal for wider string spacings, or flatter radius necks.

Replacement Rails for Pickups such as the Axesrus TT series, and DiMarzios Fast Track line

A great alternative to a pickguard, designed to mount a Telecaster® Neck Lipstick Pickup

A great alternative to a pickguard for mounting single  coil pickups in a guitar with that special finish

(2)

Please note not supplied with grounding plate.

A pair of fiber boards to build Staple poled P90s - instantly recognisable by those rectangular Alnico poles rather then the more traditional slot head screws, these are for a very unique pickup.

Single coil pickup covers, suitable for most Fender pickups, as well as DiMario, Seymour Duncan and Axesrus models - spaced 52mm center to center, to take a 5mm pole diameter.