Available in Chome with either a Cream, Black or Amber tip.

(2)

Available in Nickel or Brass with either a cream, black, or amber.
Supplied with a counter sunk mounting nut.

(1)

A smaller version of the highly regarded Switchcraft toggle Switch fitted with a longer thread
and pre-tinned terminals.
- an ideal upgrade for Epiphone.

Available in 5 way.

Spring loaded CRL lever Switch

Manufactured in Raleigh, New York, USA.

(1)

Available in 5 way

The same principle as the standard switch series, but instead of 2 tracks, the super switch offers 4. Its a bit of a headache to figure out, but once you understand it, it opens up the a whole new realm of possibilities when it comes to switching.

(2)

The gold standard when it comes to guitar lever switches, Oak Grigsby have been used on pretty much every Fender® Stratocaster® and Telecaster® since the early 80s (with the exception of some custom shop models, and prior to eighties, there, a CRL switch was used!)

This is the switch that turns up with some regularity in Ibanez HH guitars - and gives that very distinctive switching system.

(1)

CTS DPDTPush Pull pots - available in both Imperial (3/8") and are ideal for using for a variety of different jobs where you need a discrete, simple switch to alter your wiring.

CTS SPST Push Pull pots - available in both Imperial (3/8") and are ideal for using for a variety of different jobs where you need a discrete, simple switch to alter your wiring.

A rotary switch, made popular by PRS® guitars - not as common as they once were to be honest, but a great little part.

Essentially, its a super switch, similar to the traditional "lever" type - 4 switches in 1, each "input" corresponds to the position of the switch - and connects to the common, and it does it 4 times over.

Available in Chrome or Gold body with a selection of tip colours. Perfect replacement for Epiphones.or where a longer nut thread is required.

These switches have been in production for decades at this point - once
upon a time, they were pretty much exclusive to Epiphone® guitars, but
in recent years, they turn up absolutely everywhere - Fender®, Squier®,
Tokai®, PRS®... you name it! If theres a mid range guitar with a toggle
switch, chances are its one of these.

The industry standard push pull pot for "thick topped" guitars, with Long shaft Alpha pot mounted onto a DPDT (Double pole, Double throw) On/On switch. A joy to work with, opening the door to coil tapping, phase switching, kill switches etc and ideal for Les Paul Mods.

Supplied with 2 nuts and a washer.

Available in 3 Way and 5 way

the YM switches are incredibly well built, and turn up as standard on most Japanese Fender® guitars.

Available in 3 way, 4 way or 5 way.

Supplied with Counter sunk and dome head bolts.

(3)

Available in 11 Way

A brilliant alternative to a traditional lever switch.

A slight twist on the classic DPDT On/On switch pot, we've had these made in the Push/Push style.

They really come into their own on guitars with push fit knobs when you don't have enough grip on the tops to use a traditional Push/Pull pot, and often find yourself slipping as you try to engage the switch.

They can be used in exactly the same way as a Push/Pull, for Coil Tapping, kill switching etc.

(1)

Available in 3 Way and 5 way

Supplied with counter sunk, Nickel bolts.

(1)

Perfect repacement for Epiphone or Import Guitars

Great for using as kill switches, coil tapping alternatives, phase switching, series switch etc.

Four switches (each with two inputs and one output) in one housing controlled by a single toggle lever.

A standard Rhythm / Treble selector ring that will fit over most toggle switches, affixed to the guitar by a sticky backing, either with the standard mounting nut, or the extension nut seen on some Switchcraft switches.

Designed to fit Switchcraft toggle switches on to guitars with a top
panel that is deeper then the 4mm threaded section of the switch.

The industry standard push pull pot, with an Alpha mini pot mounted onto a DPDT (Double pole, Double throw) On/On switch. A joy to work with, opening the door to coil tapping, phase switching, kill switches etc.

Supplied with 2 Nuts and Washer.

Great for using as kill switches, coil tapping alternatives, phase switching, series switch etc.

Three switches (each with two inputs and one output) in one housing controlled by a single toggle lever.

Great for using as kill switches, coil tapping alternatives, phase switching, series switch etc.

Two switches (each with two inputs and one output) in one housing controlled by a single toggle lever.

Available in Aged White, Amber and Black

Made for Switchcraft Switches as used on Gibson.

(1)

Designed to fit Switchcraft toggle switches on to guitars with a top panel that is thinner then the 4mm threaded section of the switch.

8 terminal sliding switch as used for the pickup selectors on the Fender® Mustang® - ideal to be used as a pickup selector.


Please note - these are not official Fender® parts

Supplied with Mounting Bolts

Great for using as kill switches, coil tapping alternatives, phase switching, series switch etc.

One switch (with two inputs and one output) in one housing controlled by a single toggle lever.