This is a "loaded plate" - a pickguard, for the Fender® Stratocaster®, with the volume pot, tone pots, and switch all installed and wired up, ready to have pickups connected.

You're getting everything you need to build the plate up - the knobs and switch top are on there, the pickup covers are in there in the same colour as the knobs, and you're getting the pickup height bolts too.

The only thing that's missing - are the pickups!

The control loom is wired up with CTS pots (as standard, 250k audio taper, but this is customizable) a 5 way Axesrus Switch and a 0.022 Cornell Dubillier cap on the tone (again, these can be changed) and a Switchcraft mono socket.

And, functionality is as standard, master volume, neck tone and middle tone on the 3 pots, switch running Bridge, Bridge + middle, Middle, Middle + neck and Neck in the 5 positions - but this can again be changed if you want.

The pickguard is the 11 hole modern pattern thats been in place, give or take, since the 1960s - but its also available in the 50s and early 60s patterns if you click on the "customise plate" link above.

Please note – these assemblies are made to order, and as such, come under the rules and regulations pertaining to custom work in regards of returns.

Fender®, Squier®, Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation and Axesrus has no affiliation with FMIC