This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M5 poles, rather then the M3 poles found on the "traditional" humbuckers - this is an important consideration on nailing that modern Wide Range tone.

This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M3 poles, rather then the M5 poles found on the "modern" version - this is a way to get a traditional humbucker tone from a Wide range route, NOT a way to get a modern wide range tone.

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Magnetic spacers are a novel little idea, and turn up sporadically on production pickups every so often. Essentially, they replace the inert maple or plastic spacers either side of a Humbuckers poles to alter the tone, usually by making a pickup more aggressive.

Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.

Full Thread, slot head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Nickel, 33mm thread lengths

Humbucker and P90 sized Bar magnets, available in Alnico 2 and Alnico 5

62mm or 58mm x 12.5mm x 3.2mm

Slot Headed bolts with M5 thread for Wide Range humbuckers.

Full Thread, Phillips, Dome head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Chrome, Black,Nickel, Cosmo or Gold, in both 24mm and 30mm thread lengths

(2)

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4 and 5

58mm x 12.5mm x 3.2mm

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4, 5, 6, 8 and ceramic

62mm x 12.5mm x 3.2mm

(1)

These are the bar magnets commonly found in Gibson® firebird mini humbuckers - used as a magnetic pole within the bobbin, resulting in a very different tone.

One of the "oddity" sizes of bar magnet - sometimes turn up in P90s, sometimes turn up in Mini-buckers, very rarely, even in full sized humbuckers. As always, worth checking the sizes to make sure this is the one you need.

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

A slot headed, threaded cast FeCrCo magnet - a great was to build up Wide range humbuckers with truly magnetic poles pieces.

Threaded to the standard USA thread used on the originals, and whilst therese aren't CuNiFe, they're about as close as your going to get in the modern day. A great part for historically correct builds.

These are the small bras screws traditionally used to mount a humbuckers bobbins to their base plates.

Maple Humbucker Spacers

Plastic Spacers for Humbuckers

Plastic Spacers for Humbuckers

These are what we’d consider “budget” Humbucker bobbins – and, maybe, that’s overly harsh on what is, essentially, a hunk of injection molded plastic, but, for the sake of honesty – this version simply aren’t as well made as our usual Humbucker bobbins

Available in Slug and Screw type, 52 and 50mm pole spacing, and in Black, White, Ivory, Blue, Pink, Green, Orange and Chrome.

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 49.2mm, 50mm and 52mm.

These poles don't really turn up all that often - probably the pickup that instantly comes to mind when you see them, is the Seymour® Duncan® Invader® if i'm being honest - i certainly cant think of anything other then that, and pickups that essentially copied the look!

Full threaded, Hex head pole bolts for humbuckers, available in Black and Nickel in M5 threads.