This is a Wiring kit designed for as an upgrade, primarily, for PRS® guitars, specifically those with 2 pots (1 volume, 1 tone) and a 3 way toggle switch.

This wiring kit will fit any of the following guitars.

SE Custom 22
SE Santana
SE Single Cut
SE Pauls Guitar (minus the mini toggles)
USA Pauls Guitar (minus the mini toggles)
SE 277
CE 24
McCarty (not the 594 or the SE versions)
Hollow Body 12
Santana Retro

Please note, that usually, the SE models require metric sized pots, and the USA made version require imperials - and its worth noting that whilst this kit will fi the USA models - usually, PRS® guitars made in the USA have a coil splitting push pot on the tone (which isn't included in this kit, but we do a serperate kit which does include that option)

This kit is a considerable upgrade over the stock parts found on most far eastern guitars, and will be on par with the USA models, using CTS pots (500k Audio Taper for Volume and Tone), Switchcraft toggle and Mono Socket, Cornell Dubillier capacitor (0.022 @ 100v as standard)) and 22 AWG Vintage cloth wire with a metal braided screen.

This kit will likely fit many other guitars too, but as always, if in doubt, please get in touch to discuss.

Please note – these are not official Gibson® Epiphone® or PRS® parts

Kit supplied with

2 x CTS, medium shaft, 2 (Logarithmic 500k , Split Shaft)

1 x Switchcraft mono socket

1m Braided Metal Hookup Wire

1 x Orange Drop Cap ( 0.022 @200v)

1 x 3 way short Switchcraft Toggle Switch

ll Components have a tolerance of 10% or better