Magnetic spacers are a novel little idea, and turn up sporadically on production pickups every so often. Essentially, they replace the inert maple or plastic spacers either side of a Humbuckers poles to alter the tone, usually by making a pickup more aggressive.

Oversized bar magnets usually turn up in higher output 7 string pickups, and are a fantastic way to get a really unique tone.

Replacement bar magnets for single coil sized/Hot Rail pickups such as the Axesrus® TT series, DiMarzio® Fastrack line and similar pickups.

8 String Humbucker bar magnets, much longer then a standard magnet to cover the wider pole spacing.

Oversized bar magnets usually turn up in 7 String humbucker, and are a fantastic way to get a really unique tone.

Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.

Sets of Alnico rod pole pole magnets.
Available for a range of different guitars and bases, in different grades of Alnico, different combinations of length, and different diameters.

These Alnico 5 pole pieces are exactly the same as we use on our single coil pickups, but we're providing them un-magnetised to allow for full customisation.

Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.

Humbucker and P90 sized Bar magnets, available in Alnico 2 and Alnico 5

62mm or 58mm x 12.5mm x 3.2mm

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4 and 5

58mm x 12.5mm x 3.2mm

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4, 5, 6, 8 and ceramic

62mm x 12.5mm x 3.2mm

(1)

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 71.6mm

These are the bar magnets commonly found in Gibson® firebird mini humbuckers - used as a magnetic pole within the bobbin, resulting in a very different tone.

One of the "oddity" sizes of bar magnet - sometimes turn up in P90s, sometimes turn up in Mini-buckers, very rarely, even in full sized humbuckers. As always, worth checking the sizes to make sure this is the one you need.

Alnico 5 poles for our Staple pole P90s boards, covers and bases

A slot headed, threaded cast FeCrCo magnet - a great was to build up Wide range humbuckers with truly magnetic poles pieces.

Threaded to the standard USA thread used on the originals, and whilst therese aren't CuNiFe, they're about as close as your going to get in the modern day. A great part for historically correct builds.

A weird little magnet - made from C1/Y10T grade ceramic ferrite - and, honestly, not used for a whole lot nowadays - BUT - the have one historic point of note in history - this is the same spec of magnet used in the original Burns® Trisonics.

Specifically, 2 bar magnets are inserted into the space in the "air coil", adding "the charge" and making the whole pickup work.

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

Maple Humbucker Spacers

Plastic Spacers for Humbuckers

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

This is the "reflector plate" that sits on top of the bobbins on a mini
humbucker which has bar magnet poles, as seen on the Gibson® Firebird.

This is the "reflector plate" that sits under the bobbins on a mini
humbucker which has bar magnet poles, as seen on the Gibson® Firebird.

Steel rail pole to be used on a traditional build mini humbucker

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

Plastic Spacers for Humbuckers