The Pot bracket used to mount the side loading pots on the Fender® Jazzmaster®

The Pot bracket used to mount the side loading pots on the Fender® Jaguar®

This is the switch control plate for the Fender® Jaguar®.

Grip-Lock Open Guitar Tuners by Hipshot take the chore out of string changes and increase your tuning stability at the same time.

Grip-Lock Open Guitar Tuners by Hipshot take the chore out of string changes and increase your tuning stability at the same time.

A standard "Hot Dog" control plate drilled for Volume and Tone pots, and a standard switch. Plated to the highest standard with a conductive material to minimise the amount of ground wires you’ll need.

A standard control plate for the Telecaster®, with a standard switch slot, and two pot holes large enough to take CTS pots. Fantastically well finished, with a high level of electroplating.

(1)

This is a Steel control plate, immaculately plated, to fit a Fender® Mustang® Bass

This is a Steel control plate, immaculately plated, to fit a Fender® Mustang® Guitar

A standard control plate for the Telecaster®, in the size most commonly used by Fender® Japan - slightly wider then the USA version, and drilled out to accept metric sized pots.

(1)

This is one of the control plates you will need for the Fender® Jaguar®. Fulfilling a purely functional role in the grand scheme of things, it is simply there to provide mounting for the volume and tone controls as well as the jack socket.

This is the switch control plate for the Fender® Jaguar®.

An Over String bass metal pickup cover, this Pickup cover actually sits above the pickup and the strings.

A blank control plate for the Telecaster®, fantastically well finished, with a high level of electroplating.

A 32mm wide control plate for the Telecaster® with a slanted switch slot. Fantastically well finished, with a high level of electroplating. Supplied with cross head, recessed mounting screws. Please note these are not official Fender® parts.

A 32mm wide control plate for the Telecaster®, with a hole for a toggle switch. Fantastically well finished, with a high level of electroplating. Supplied with cross head, recessed mounting screws. Please note these are not official Fender® parts.

Vintage Style Diamond Back Machine Heads Removable back over for easy cleaning. Great vintage look for a 3x3 project.

A "Small" bass bridge cover – matching up to the style used on models made after 1958

A Large bass bridge pickup cover – Released with the original as a companion part to the metal “over string” pickup cover.

Quick and affordable replacement machine heads. No bells and whisles, just reliable tuning pegs. Removable back plate for easy maintainance.

(1)

Following on from the "3 Hole" version, the "4 hole" version became the standard part used on basses from 1962 until the modern era.

Available in Chrome. Quick and affordable replacement machine heads. No bells and whisles, just reliable tuning pegs. Removable back plate for easy maintainance.

Supplied with Push in Bushes and Screws

The “3 hole” version of the bass control plate appeared at the very birth of the instrument in 1960, and ran through all of 61 and into the early part of 1962. Conversely, most of the ’62 re-issues sport this style of plate, whilst the majority of the originals seem to come with the “4 hole” version.

This is a conversion plate for the Fender® Jaguar® (specifically the USA model) routed for use with a toggle switch, as a way of simplifying the switching.

After the huge success of the Rear Disc Locking S type machine heads in the Luthiers love range, we’ve commissioned a new line built around the same ethos!

Much lighter than the locking version and much more streamlined, these are slightly less “modern” looking, and a little more understated, which is something we’ve been looking for in recent months.

Great quality vintage style machine heads, built around that classic 14:1 ratio, in a chrome finish with nitrate green tulip heads

(4)

We're really pleased to announce our brand new line of Vintage styled machine heads - starting off with the exceptional Double Deluxe series!

Built to that timeless formula, with a 14:1 gearing, nut and washer mounting and moulded tulip heads , these are ideal replacements for most Kluson® or Gibson® Machine head with the same fitting system, or as a “vintage modification” to many Epiphone®

(2)

Built around our high ratio (18:1) gearing system thats proving so popular on the 135 mount machine heads, but housed in the "R" mount machine head made popular by Gibson® on their Electo-Spanish guitars in the late 50s.


Please note - these are not official Gibson Parts

Axesrus "135 High Ratio" Machine Heads - Chrome - Set

We're really pleased to announce our brand new line of Vintage styled machine heads - following on from the Double Deluxe, we've brought out the same machine head in the Chicago style. Polished and poised, they really are a beautiful bit of kit.

Built to that timeless formula, with a 14:1 gearing, nut and washer mounting and molded tulip heads , these are ideal replacements for most Kluson® or Gibson® Machine head with the same fitting system, or as a “vintage modification” to many Epiphone®

(1)