This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

Slightly larger then the Ferrules seen on guitars from the USA, Korea
and China - with a diameter of 9.5mm, a length of 9.5mm and lacking the
characteristic lip of "normal" ferrules - they turn up fairly often on
Japanese Fender® Telecaster® guitars, but in all likelihood turn up on
other makes and models too.

The bolt from Wilkinson Tremolos, used to secure the whammy arm into the plastic bushing, by screwing into the block.

Available in Black, Chrome or Gold

Replacement Parts for most tremolos produced outside of the USA

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

The little wheels used to alter the height of the Nashville style bridges. Suitable for Bridges with 6mm Holes.

The little wheels used to alter the height of the ABR style bridges. Suitable for Bridges with 4mm Holes.

Available in Gold, Nickel, Chrome and Black, Domed Phillips Head .

Perfect for vintage style tremolos.

Available in Gold, Chrome and Black, Recessed Phillips Head .

A bit of an odd ball part, we generally find their great for hard tail bridges, where the full thread offers a tight lock without having to compromise for the movement of a trem unit.

(1)

Available in Gold, Chrome and Black, Recessed Phillips Head .

A perfect replacement for most bridge screws.

Snapped a retainer bolt on the back of your Floyd ? Fear not, we've got spares, as standard on all original style Floyd Rose Trems. Just remove the old Bolt and replace. Total Length - 45mm

Supplied with Hex key (just in case)

Nice, chunky offset saddle saddles. Supplied with Screws, springs, Height Bolts, and Hex Key.

The little wheels used to alter the height of the Nashville style bridges. Suitable for Bridges with 4mm Holes.

Fits both push on and screw on arms.

Small Ferrules fitted into the top of a body, eliminating the need for a tail piece, and giving the advantage of stringing through the body of the guitar, bringing in a little more of the woods characteristics into the sound.

Good Quality, metal clamps for Floyd rose lock nuts. Available in Chrome, Gold and Black.

Set of 4 brass saddle shims.

Suitable for use with the GE1996T

Available in Stainless steel. Roughly 69mm in Length.

These are steel, imperial tail piece posts, suitable for Gibson and guitars using similar tail pieces with 5/16 inch threads

These are steel, M8 tail piece studs, suitable for most Epiphone models, which use tail pieces, and guitars made in to metric specifications,

Suitable for a Telecaster® and Hardtail Bridges

Designed to fit into the back of a bass to allow for string through body bridges, Argued to give a little more sustain, and draw in a little more of the body woods characteristics into your sound.

Simply a case of dropping the arm into the hole on the Trem, then tightening the hex bolt at the back to keep it in place. 5mm at the trem end.

Available in Gold w/Black Tip, Chrome w/White Tip or Black w/Black Tip.

5mm External thread. Should be a perfect replacement for most vintage USA trems, as well as many imports. Simply Screws into the threaded hole in the block. M5 thread
Available in Chrome

Usually for Thin Block Tremolo's

Available in Chrome, Gold and Black

5.7mm External thread. Should be a good replacement for any thin block trems, as well as many imports. Simply Screws into the threaded hole in the block.

(1)

Right Handed, Thick thread Whammy Arm - No Tip

Available in Chrome, Gold and Black M6 External thread. Should be a good replacement for any thin block trems, as well as many imports. Simply Screws into the theaded hole in the block.

About 5mm at the trem end, simply force the ball end into the cavity and through a washer where it will hold. No need for hex keys or threads.  Available in Chrome, Gold and Black Only in Right handed

Just a small kit containing the 3 stainless Steel springs, Claw and its mounting screws.