This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

Available in Black, Chrome or Gold

Replacement Parts for most tremolos produced outside of the USA

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

The little wheels used to alter the height of the Nashville style bridges. Suitable for Bridges with 6mm Holes.

The little wheels used to alter the height of the ABR style bridges. Suitable for Bridges with 4mm Holes.

Available in Gold, Nickel, Chrome and Black, Domed Phillips Head .

Perfect for vintage style tremolos.

Available in Gold, Chrome and Black, Recessed Phillips Head .

A bit of an odd ball part, we generally find their great for hard tail bridges, where the full thread offers a tight lock without having to compromise for the movement of a trem unit.

(1)

Available in Gold, Chrome and Black, Recessed Phillips Head .

A perfect replacement for most bridge screws.

Snapped a retainer bolt on the back of your Floyd ? Fear not, we've got spares, as standard on all original style Floyd Rose Trems. Just remove the old Bolt and replace. Total Length - 45mm

Supplied with Hex key (just in case)

The little wheels used to alter the height of the Nashville style bridges. Suitable for Bridges with 4mm Holes.

Available in Stainless steel. Roughly 69mm in Length.

These are steel, imperial tail piece posts, suitable for Gibson and guitars using similar tail pieces with 5/16 inch threads

These are steel, M8 tail piece studs, suitable for most Epiphone models, which use tail pieces, and guitars made in to metric specifications,

Just a small kit containing the 3 stainless Steel springs, Claw and its mounting screws.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

Good Quality, metal studs for Floyd rose and modern Trems Available in Chrome, Gold and Black.

Good Quality, metal studs for Floyd rose and modern Trems Available in Chrome, Gold and Black.

Studs for holding in Les Paul® Style Tail Pieces, but with the added bonus of actually clamping down on the tail piece to hold it in place when the strings are removed.

Please note – these are not official Gibson® parts

This is a Nashville bridge stud suitable for any Gibson® guitar, fitted with that style of bridge (NOT an ABR) released AFTER 2012.

Prior to 2012, Nashville bridge equipped Gibson® guitars used an 4mm post into an M5 threaded bush.

Nickel Height Adjustment Screws suitable for bridges and saddles produced either in the USA, or using imperial threads.

They screw into the M8 bushes you'll find on most "mid range" guitars made in the far east - most common on guitars like Epiphone®, but, really, anything that normally comes with a bridge with 6mm posts (easily identifiable because of the slot head in the post) and the part that sticks up, above the bush, is a 6-32 UNC section, which will allow you to fit a "real" ABR, with the smaller holes.

Gibson, strangely, actually use M5 threaded posts on their Nashvilles posts/bushes, rather then an Imperial thread, which is a little confusing, but beyond that, its as you expect really. These are conversion posts - allowing you to fit "true" ABR style bridges onto guitars that were never designed to take them.

Locking tail piece posts are quite clever actually. The "top"
section of the post unscrews onto the bottom, so its capable of
"holding" the tail piece in situ, so it will never fall off and go
missing mid string change.

Locking tail piece posts are quite clever actually. The "top" section of the post unscrews onto the bottom, so its capable of "holding" the tail piece in situ, so it will never fall off and go missing mid string change.

These are aluminum, imperial tail piece posts, suitable for Gibson and guitars using similar tail pieces with 5/16 inch threads

Hipshots patented system for stabilising Trem systems. The basic concept is that after whammy use, the trem-setter puts the trem back, exactly at its initial point. Minimising string movement as much as possible.


Supplied with all parts required for standard installation